Truck mount carpet cleaning is actually a water-based vacuum-extraction cleaning technique that is definitely extra effective and can be far more successful than solvent-based methods.
BSCs can choose amongst two various forms of truck mount systems: Slide-in truck mounts, which are powered by their very own engines and are constructed within a frame or chassis that is definitely bolted into the vehicle, and van-powered truck mounts, that are powered off of your engine with the automobile. With each selections, the machines supply the cleaning answer, heat, stress and vacuum for the cleaning operation.
Slide-in truck mount systems may be utilised on a number of autos and may be conveniently transferred from one particular automobile to a further. These systems also consume reduced amounts of gas. On the other hand, slide-in truck mounts take up many cargo space. They are also usually more complicated to operate and have greater maintenance requirements.
Van-powered systems, around the other hand, are additional compact, so they take up less interior space in the automobile. In addition they usually demand less upkeep so they are additional trusted. In contrast to slide-in systems, van-powered extractors are limited in automobile alternatives. Additionally they consume much more gas; during final year’s gas price spikes, this would have already been a concern for many BSCs.
Despite their differences, both truck mount versions are in a position to clean carpets more quickly than transportable machines. And because they don’t need to be emptied often like portable extractors, many BSCs tout their comfort, too.
“You cannot beat the energy or the heat and also the virtually endless water provide,” says Bob Merkt, owner of Kettle Moraine Professional Cleaners Inc., West Bend, Wis. “We carry 110 gallons of clean water vs. the portables that you just must frequently fill and dump out.”
Given that each of the answer tanks, cleaning items and waste tanks are mounted on the vehicle, there is no need to have for an exterior energy or water source to carry out the cleaning operation.
“You will not need buckets of water and solutions to carry by means of the constructing, so the possibility of spilling is significantly decreased,” says Jim Thompson, owner of A1 Constructing Services, Wyoming, Mich. “All the dirty water containing the soil is vacuumed in to the waste tank mounted around the vehicle.”
Truck mount extractors take away soil, chemicals and pollen from carpets easier than portables mainly because suction is stronger plus the water gets heated to a higher temperature.
“I would say that it’s at the least 3 occasions more quickly than working with the portables,” says Merkt.
Transportable Power
Portable extractors have come a long way in the last decade and a lot of BSCs favor them to the truck mount extractors.
“I’ve looked into truck mounts, nearly bought them, but just didn’t comprehend why they are a lot far better,” says Evelyn Pino, owner of Action Janitorial in Pleasantville, N.J. “With a portable machine it is possible to easily transport them from floor to floor, it is possible to get into smaller spaces and also you can get up in tight corners. Plus, do you actually need to have all that power that a truck mount gives you?”
If a BSC is operating on a high-rise developing, he won’t have the ability to use a truck mount method. Even though truck mounts use optimistic displacement vacuum pumps that allow them to clean various hundred feet away from the unit with minimal loss of energy, they are not suggested for use at these lengthy distances, because the hoses start to lose pressure when they reach 150 feet. Thus, anything above the third floor of a developing is not going to be cleaned too.
Even when the hoses can reach, at times they can be as well a lot of a nuisance in commercial cleaning.
“We operate for 4 distinctive hospitals and we’re coping with five-, six-, seven-story buildings and truck mounts aren’t a great option mainly because you do not desire to be dragging hoses by means of the floors of a hospital, naturally,” Thompson says. “We use a couple of distinctive systems as well as the dry-time for our systems are about 45 minutes. Shutting down an area for six to seven hours, which could be essential if applying a truck mount, isn’t an choice.”
There’s also a safety factor that need to be taken into account for those who work at sensitive facilities.
“You’re not going to desire to leave a door open at a bank or lawyer’s workplace, where there is often worthwhile or sensitive material inside, so a truck mount isn’t practical for these environments,” says Merkt.
Portables, having said that, do have their very own problems, which includes continual emptying and refilling, specifically on floors that might not offer access to a janitor’s closet.
“You may well need to visit an additional floor to empty and refill which adds time,” says Pino.
And staying longer at accounts is one particular issue BSCs choose to steer clear of.